Stability conditions

The stability conditions of watercraft are the various standard loading configurations to which a ship, boat, or offshore platform may be subjected. They are recognized by classification societies such as Det Norske Veritas, Lloyd's Register and American Bureau of Shipping (ABS). Classification societies follow rules and guidelines laid down by International Convention for the Safety of Life at Sea (SOLAS) conventions, the International Maritime Organization and laws of the country under which the vessel is flagged, such as the Code of Federal Regulations.

Stability is normally broken into two distinct types: intact and damaged.

Intact stability

The vessel is in normal operational configuration. The hull is not breached in any compartment. The vessel will be expected to meet various stability criteria such as GMt (metacentric height), area under the GZ (righting lever) curve, range of stability, trim, etc.

Intact conditions

Lightship or Light Displacement

The vessel is complete and ready for service in every respect, including permanent ballast, spare parts, lubricating oil, and working stores but is without fuel, cargo, drinking or washing water, officers, crew, passengers, their effects, temporary ballast or any other variable load.^[1]^[2]

Full load departure or full displacement

Along with all the Lightship loads, the vessel has all systems charged meaning that all fresh water, cooling, lubricating, hydraulic and fuel service header tanks, piping and equipment systems are filled with their normal operating fluids. Crew and effects are at their normal values. Consumables (provisions, potable water and fuel) are at 100% capacity. Ammunition and/or cargo is at maximum capacity. The vessel is at its limiting draft or legal load line.

Standard condition

This is only for military vessels. Along with all the Lightship loads, the vessel has all systems charged meaning that all fresh water, cooling, lubricating, hydraulic and fuel service header tanks, piping and equipment systems are filled with their normal operating fluids. Crew and effects are at their normal values. Consumables (provisions, potable water and fuel) are at 50% capacity. Ammunition and/or cargo is at 100% capacity. This condition is normally used for range and speed calculations.

Light arrival

Along with all the Lightship loads, the vessel has all systems charged meaning that all fresh water, cooling, lubricating, hydraulic and fuel service header tanks, piping and equipment systems are filled with their normal operating fluids. Crew and effects are at their normal values. Consumables (provisions, potable water and fuel) are at 10% full load. Ammunition and/or cargo is at 100% capacity.

Damaged stability

The vessel in the assessed "Worst Intact Condition" is analytically damaged by opening various combinations of watertight compartments to the sea. The number of compartments and their location are dictated by IMO regulations, SOLAS conventions, or other applicable rules. Typically these conditions are identified by the compartment(s) damaged ex: "Hold #3 and Water Ballast Tank 4 Port"

References

External links

nvr.navy.mil, definitions

[1] "Naval Ships Technical Manual Chapter 096 - Weights and Stability"

[2] "Definition of Light Displacement at Naval Vessel Register"^{[permanent dead link]}

[1]

[2]